Manual & Care

Setting the watch

To set the CLASSIC watch carefully pull the crown out into the desired position (see fig.):

1.  Rest mode
    - Clock is running
2. Date set-up
Blocking period for the calendar quick correction from approx. 21:30 - 24:00 o'clock
    - Pull out crown in position 2 (clock continues to run).
    - Turn the crown until the current date appears.
    - Press crown back to position 1.
3. Time set-up
   - Pull out crown in position 3 (clock stops).
   - Turn the crown until the current time is displayed (observe the 24-hour rhythm).
   - Press crown back to position 1.

To set the MISS watch, carefully pull out the crown to the desired position (see Fig.):

1. Rest mode
- Clock is running
2. Time set-up
- Pull out crown in position 2 (clock stops).
- Turn the crown until the current time is displayed (observe the 24-hour rhythm).
- Press crown back to position 1.

Straps with quick-exchange system
You can choose between different straps (leather / mesh / nylon):
For Mesch and leather straps, proceed as follows:

Step 1:
Push spring-loaded locking lever (1) clockwise and hold (see fig.)
Step 2:
Away from the watch case
Turn / tilt. (1) and then
Remove the strap (2) (see fig.).
Step 3:
Second strap (opposite side) analogous to step (1) and (2)
Step 4:
Fit new strap in turned order.

Water-resistance

Your Zeitschätzer is water proof up to 50 m of underwater diving pressure. It easily keeps the water out as you go about your everyday routines, such as washing your hands or the dishes. However, it’s not designed for permanent exposure to water.

Only have the battery changed by a professional watchmaker.